3 axis soldering robots provides the best solution for soldering job on lead-free, heat dissipating PCB, and high thermal capacity components. It is suitable for all sorts of difficult soldering tasks and micro soldering process. It effectively improves the soldering quality and consistency. Besides, it saves 30% of the solder consumption comparing to manual soldering.
1. High power heating controller ensures the tip temperature to reach 350°C within 30 seconds.
2. With the sleeve design, the soldering tip can be replaced quickly and easily.
3. Intelligent solder feeding mode, parameters can be set freely.
4. Automatic tip cleaning function by airflow cleaning, the residual dross on the tip can be blown off easily.
5. With the function of spot welding, drag soldering, automatic cleaning and etc.
6. With the function of position correct, position copy, array, auto-fixed location and etc. This machine can be easily to operate.
7. All kinds of parameters can be set to make sure the high welding quality
1. Applicable for different products, soldering temperature can be set freely.
2. The solddering iron unit can be multi-directionally adjusted, which can protect the PCB and components from damage.
3. Numerically controlled temperature (static air condition: ±1℃).
4. With the handheld LCD Teaching Pendant, the programming is simple and easy to learn.
5. In the soldering process, the solder tip has rapid heat recovery and a long life span.
|3||Preheating Temperature Range||0℃~550℃|
|4||Solder Wire Diameter||0.5, 0.6, 0.8, 1.0, 1.2 (mm)|
|5||Operation Range (X*Y*Z) (mm)||480*280*80mm|
|6||Axes||5 Axis (X,Y1,Y2,Z,R)|
|7||Maximum Speed||X,Y 500mm/S, Z 300mm/S|
|8||Repeated precision||X,Y,Z ±0.02mm|
|9||Teaching Method||Remote Teaching/Manual Data Input/Optional: LCD Touch Screen|
|10||Motor system||precision stepper motor|
|11||Transmission mode||Precision Stepping Motor+Timing belt|
|12||Control Panel||Teach pendant (optional:PC or Touch Screen)|
|14||External Interface||USB + RS232|
|15||Power Source||Electricity + Pneumatic|
|16||Air pressure requirement||0.4 to 0.6MPa (4 to 6kg/cm2) as dry air|
|17||Dimension (L*W*H) (mm)||1040*680*900mm|
The robot is widely used for welding all kinds of plug-in electronic components such as capacitors,resistors,plugs,shield boxes,etc.,as well as various electronic connectors,LED lamp posts and light strips,video cable plugs,audio cable plugs,RF cables plugs,sockets,headphone cable,computer cable,USB cable,power lines and small ciruit board etc.