Sitemap | RSS | XML
Industry News

What are the performance of automatic plane mask machine


Product Introduction:

High Speed Face Mask Machine (1+2), fully automatic plane mask production machine, consists of a body and two ear belt spot welding machine.From the production of the mask itself to the welding of the ear strap, nose line and the finished product, it is completely automated and does not need any manual operation.

This device is to connect one mask body making machine with two mask ear tape fusing machines. After the mask body is made, the transmission tape is sent to the ear tape fusing machine for ear tape melting.Can complete a full face mask, ear only needs one operator can operate the whole production, the production line the fully automated production of planar masks, mainly consists of coiled material feeding, folding, pressing, the bridge of the nose bar feeding, masks, masks cut, ear wear and welding, finished product blanking process, complete the whole production process from raw material to mask the finished product.

The masks are comfortable to wear and have no sense of pressure. The masks have good filtering effect and can be applied to medical and health care, electronics, mining, construction and other industries.

Product features:

1. The machine is small in size and occupies a small area. The whole machine adopts aluminum alloy structure, which is beautiful, firm and non-rusting.

2. Extremely high output, 1-5 layers of mask body can be produced according to customer requirements;

3. The folding position and size of the mask itself can be adjusted;

4. The direction of the ear band of the mask is outward;

5. Compared with the segmented mask production equipment, this set of equipment is more efficient and more labor-saving;

6. PLC program control, photoelectric detection, high reliability, low failure rate;

Main technical parameters

1. The machine is composed of an automatic separation system connecting a mask body machine and two ear tape machines.The mask body produced by the body machine can be evenly distributed by PLC to two sets of external ear tape machines at a speed of 80-120 pieces per minute.The whole process can be controlled by man-machine interface touch screen operation

2. Machine size :6850mm×35200mm×1990mm

3. More than 80,000 masks per day (20h production)

4. Voltage: 220v60HZ

5. Pressure: 6kg/cm2

6. Power: 11KW

7. Control mode: PLC

8. Detection method: photoelectric detection

9. Weight of machine: 1600KG

Main functions and advantages

1. Automatic counting can effectively control production efficiency and production schedule.

2. The frame is made of aluminum alloy and stainless steel, light and beautiful without rust.

3. Frequency conversion control, which can adjust the running speed of the equipment according to actual needs.

4. Pull the barrel into the material, more accurate positioning, can make the width of the raw material control to the minimum, save cost.

5. The length and size of finished products are controlled uniformly, with a deviation of ±1mm, which can effectively control the length of finished products.

6. High degree of automation of equipment, low requirements for operating staff, only need to put materials and finish the finished products.

7. The banding-type medical mask machine is equipped with ultrasonic system, transducer, stable performance and convenient operation.

8. The automatic ultrasonic welding wheel is made of imported high-quality steel DC53, which extends the life of the mold and makes it wear and durable.